Building A Cubby House How Do I Affix My Cubby House To A Brick Base...?

How do I affix my cubby house to a brick base...? - building a cubby house

I want to dig a cellar, walk for blocks of concrete, then create a brick cellar closed down, where it plans to build my cabin.

As the cabin will save it for the stones to do in a similar way to professional builders?

PS I live in Queensland, Australia, and the ground around my house is rich black loam spongy (valley) ... The soil is very deep (the man dug six feet, and was still in the ground.

What do you suggest, operators and manufacturers?

4 comments:

Steve C said...

I like the big Rawl bolts could be seen as the anchor bolts.

as the last man said that it is only in retro-holes is provided, it can also be used in brick.

Steve C said...

I like the big Rawl bolts could be seen as the anchor bolts.

as the last man said that it is only in retro-holes is provided, it can also be used in brick.

a a said...

I do not know how what I do, but see it from here in the states, which is poured into the foundation before it is incorporated, add Big A $ $ screws on the edge of the foundation. Then, when you frame the house to put the holes in the bottom of the 2x4 studs through and fix it.

kaynerie... said...

This means that you need to dig a 10 "to get deep into a room of it, 8 '. The reason is that the bottom 1' of the concrete and the need for 1 'to the roof. You must be the" size "govern in his room with wood, except around the side of the house. They always add 1 'of concrete around it. It is also necessary to add the width of the brick.
So far, 2 meters is not enough, not enough to stand in the Sala.
I hope I can help a little, I am not an architect, but my brothers are here in the building at the airport!
Good luck with your project.

Post a Comment